IBERRY BYPASS PASSCODE WITH SIGNAL / IPHONE 11 PRO / SUPPORTED IOS 17 TO 27

iBerry Passcode Bypass A12-A13
User Manual
Quick setup guide for iBerry with Raspberry Pi Pico 2 / Waveshare RP2350.

Passcode Service – Step-by-Step Guide
Stage 1 – Backup & Erase
Step 1
Connect your device in Recovery Mode.
⏳ Wait until the device information appears in the tool.
Step 2
⚡️ Click DFU and follow the on-screen instructions to enter DFU Mode.
Step 3
Click Boot.
Step 4
Click Backup and wait until the process completes successfully.
Step 5
Click Erase.
⏳ Wait for the erase process to finish successfully.

Stage 2 – Activate
Step 1
Put the device back into DFU Mode.
Step 2
Click Boot.
Step 3
✅ Click Activate.
Done! Your device has been successfully erased and activated.

Pico Firmware (One-Time Setup)
Before using the tool for the first time, flash the latest USBLiter8 firmware to your Raspberry Pi Pico 2 or Waveshare RP2350 board.

USBLiter8 Firmware
⚠️ Flashing the firmware is only required once. Keep your board updated whenever a new USBLiter8 release becomes available.

⚠️ Important Notice for Windows Users [Please Read]

Some Windows users may receive an “Unsupported Device” or “Required Files Missing” error due to outdated Windows versions, missing updates, system activation issues, or incompatible drivers.

For the fastest and most reliable bypass experience, we currently recommend using macOS to bypass your device. An improved Windows version is under development.

Download Mac & Windows Tool

Download USBLiter8 Firmware
⚠️ NO REFUND FOR WRONG SUBMISSION